60 C1 Under dash wire installation

With all the wires in the area of the cluster the order of installation is important.. Looking at the back of the gauges from the firewall side, Don’t install the light switch yet or remove it. Install wiper switch or leave it in. Black ground gauge cluster. Amp gauge Red on the left, black on the right (from engine harness) Red pig tail goes to lighter Plug connector into ignition switch (from engine harness) Plug pink wires into ignition switch (from engine harness) Temp gauge Dark blue on the left, pink on the right (from engine harness) Fuel gauge Brown on the left, pink on the right Long gray wire bulb to top hole in right side of speedometer case (left blinker side) Long gray wire bulb to top hole in left side of speedometer case (right blinker side) Light green wire bulb to middle hole on left side of speedometer case (right blinker side) Dark blue wire bulb to bottom hole on left side of speedometer case (right blinker) Tan wire bulb, a separate wire to middle hole on right side of speedometer case Light blue wire bulb to bottom hole of right side of speedometer case (left blinker) Plug the light harness in and install the light switch

The order of installation isn’t critical on the balance of the wires.

60 C1 Under dash wire installation

HOME